abc
2005-07-23 18:45:08 UTC
Hallo,
mit YaST unter SuSE 9.3 habe ich einen Anrufbeantworter eingerichtet.
Alles lief wunderbar: Der AB nahm Gespräche entgegen, die Fernabfrage
funktionierte und die Voicemails wurden perl EMail weitergeleitet.
Doch plötzlich funktioniert davon gar nichts mehr..
Weder ein Neustart, noch ein neuinstallieren der Karte, der Treiber, der
Software oder der Einträge des AB ändern daran etwas.
Meine ISDN-Karte ist eine AVM-Fritzcard PCI. Dieses ist die einzige
ISDN-Karte im Rechner. Für die Karte habe ich den Capi 2.0 Treiber
ausgweählt.
Mir fällt auf, das eingehende Anrufe nur vom Prozess isdnlog erkannt und
nach /var/log/messages ausgegeben werden.
Obwohl ich in /etc/capisuite/capisuite.conf den Debuglevel auf 3 erhöht
habe erscheint keine weitere Meldung.
Hier die Meldungen ab "rcisdn restart":
Sat Jul 23 20:34:59 2005 -
/var/log/messages:-----------------------------------
Jul 23 20:34:54 iqx isdnlog: Got signal 15
Jul 23 20:34:54 iqx isdnlog: exit now 7
Jul 23 20:34:54 iqx isdnlog: File /var/run/isdnlog.isdnctrl0.pid removed!
Jul 23 20:34:54 iqx isdnlog: File /var/lock/LCK..isdnctrl0 removed!
Jul 23 20:34:54 iqx kernel: fcpci: Removing registered applications!
Jul 23 20:34:54 iqx kernel: kcapi: card 1 down.
Jul 23 20:34:54 iqx kernel: capidrv: controller 1 down
Jul 23 20:34:54 iqx kernel: capidrv-1: now down.
Jul 23 20:34:54 iqx kernel: fcpci: Removing...
Jul 23 20:34:54 iqx kernel: kcapi: Controller 1: fcpci-d000-10 unregistered
Jul 23 20:34:54 iqx kernel: fcpci: Removed.
Jul 23 20:34:54 iqx kernel: fcpci: Driver 'fcpci' detached
Jul 23 20:34:54 iqx kernel: capidrv: Rev 1.1.2.2 : unloaded
Jul 23 20:34:54 iqx kernel: ISDN-subsystem unloaded
Jul 23 20:34:55 iqx kernel: fcpci: unsupported module, tainting kernel.
Jul 23 20:34:55 iqx kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.6.0
Jul 23 20:34:55 iqx kernel: fcpci: (fcpci built on Jun 2 2005 at 20:51:51)
Jul 23 20:34:55 iqx kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI
10 (level, low) -> IRQ 10
Jul 23 20:34:55 iqx kernel: fcpci: AVM FRITZ!Card PCI found: port
0xd000, irq 10
Jul 23 20:34:55 iqx kernel: fcpci: Loading...
Jul 23 20:34:55 iqx kernel: fcpci: Driver 'fcpci' attached to stack. (152)
Jul 23 20:34:55 iqx kernel: fcpci: Stack version 3.11-02
Jul 23 20:34:55 iqx kernel: kcapi: Controller 1: fcpci-d000-10 attached
Jul 23 20:34:55 iqx kernel: kcapi: card 1 "fcpci-d000-10" ready.
Jul 23 20:34:55 iqx kernel: fcpci: Loaded.
Jul 23 20:34:55 iqx kernel: ISDN subsystem Rev:
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 23 20:34:55 iqx kernel: capidrv-1: now up (2 B channels)
Jul 23 20:34:55 iqx kernel: capidrv-1: D2 trace enabled
Jul 23 20:34:55 iqx kernel: capidrv: Rev 1.1.2.2: loaded
Jul 23 20:34:55 iqx isdnlog: isdnlog Version 4.70 starting
Jul 23 20:34:55 iqx isdnlog: Holiday Version 1.10-Germany [12-Apr-1999]
loaded [11 entries from /usr/lib/isdn/holiday-de.dat]
Jul 23 20:34:55 iqx isdnlog: Dest V1.01: File '/usr/lib/isdn/dest.cdb'
opened fine - Dest 1.0 int (+h) AT DE NL CH BE CN
Jul 23 20:34:55 iqx isdnlog: Zone V1.25: Provider 0 File
'/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147
O1 L5
Jul 23 20:34:55 iqx isdnlog: Rates Version 3.12 [27-Feb-2005 22:15:34]
loaded [87 Providers, 0 skipped, 1325 Zones, 4755 Areas, 86 Services,
726 Comments, 10 eXceptions, 65 Redirects, 4298 Rates from
/usr/lib/isdn/rate-de.dat]
Jul 23 20:34:55 iqx isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16
detected, ioctl(IIOCNETGPN) is available)
Jul 23 20:34:55 iqx isdnlog: isdn.conf:2 active channels, 4 MSN/SI entries
Jul 23 20:34:55 iqx isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06
/dev/isdninfo=0x01)
Jul 23 20:34:55 iqx isdnlog: Everything is fine, isdnlog-4.70 is running
in full featured mode.
--------------------------------------------------------------------------------
Jetzt noch "rccapisuite restart":
Sat Jul 23 20:35:58 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffffc40: requested finish
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: CapiSuite 0.4.5 started.
Sat Jul 23 20:35:52 2005 Capi 0x817c680: Capi object created
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x0 Controller 0x1 InfoMask 0x10 CIPMask 0x0 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Capi 0x817c680: Registered successful at CAPI
with ApplId 2
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: 1 controllers found
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: Capi driver: AVM Berlin,
version 2.0/1.16
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: Controller 1: AVM GmbH (2
B channels, DTMF, SuppServ, transparent, FaxG3, FaxG3ext), driver
version 2.0/49.18
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x1 Controller 0x1 InfoMask 0x10 CIPMask 0x10012 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x2 Controller 0x1 InfoMask 0x10 CIPMask 0x30012 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: PythonScript created.
Sat Jul 23 20:35:52 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: IdleScript created.
Sat Jul 23 20:35:55 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:35:55 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Sat Jul 23 20:35:58 2005 -
/var/log/capisuite.error:----------------------------
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: CapiSuite 0.4.5 started.
--------------------------------------------------------------------------------
So jetzt rufe ich mich intern mal an:
Sat Jul 23 20:37:33 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:37:27 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:37:27 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Sat Jul 23 20:37:58 2005 -
/var/log/messages:-----------------------------------
Jul 23 20:37:53 iqx isdnlog: (AVM B1 driver detected (D2))
Jul 23 20:37:53 iqx isdnlog: Jul 23 20:37:53 * Call to tei 127 from TN
**14 on Gregor (privat) RING (Speech)
Jul 23 20:37:53 iqx isdnlog: Jul 23 20:37:53 * Call to tei 127 from TN
**14 on Gregor (privat) HLC: CCITT, Telefonie
Jul 23 20:37:56 iqx isdnlog: Jul 23 20:37:56 * Call to tei 127 from TN
**14 on Gregor (privat) RING (Speech)
Jul 23 20:37:56 iqx isdnlog: Jul 23 20:37:56 * Call to tei 127 from TN
**14 on Gregor (privat) HLC: CCITT, Telefonie
--------------------------------------------------------------------------------
Sat Jul 23 20:38:03 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:37:58 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:37:58 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Der capisuite-Daemon läuft und ruft offensichtlich regelmässig sein
Idle-Skript auf.
Leider finde ich nirgendwo eine Fehlermeldung. Ich habe daher leider
keinen Anhaltspunkt, warum der AB aufeinmal nicht mehr funktioniert.
Gibt es eine Möglichkeit mehr Debugmeldungen zu aktivieren?
mit YaST unter SuSE 9.3 habe ich einen Anrufbeantworter eingerichtet.
Alles lief wunderbar: Der AB nahm Gespräche entgegen, die Fernabfrage
funktionierte und die Voicemails wurden perl EMail weitergeleitet.
Doch plötzlich funktioniert davon gar nichts mehr..
Weder ein Neustart, noch ein neuinstallieren der Karte, der Treiber, der
Software oder der Einträge des AB ändern daran etwas.
Meine ISDN-Karte ist eine AVM-Fritzcard PCI. Dieses ist die einzige
ISDN-Karte im Rechner. Für die Karte habe ich den Capi 2.0 Treiber
ausgweählt.
Mir fällt auf, das eingehende Anrufe nur vom Prozess isdnlog erkannt und
nach /var/log/messages ausgegeben werden.
Obwohl ich in /etc/capisuite/capisuite.conf den Debuglevel auf 3 erhöht
habe erscheint keine weitere Meldung.
Hier die Meldungen ab "rcisdn restart":
Sat Jul 23 20:34:59 2005 -
/var/log/messages:-----------------------------------
Jul 23 20:34:54 iqx isdnlog: Got signal 15
Jul 23 20:34:54 iqx isdnlog: exit now 7
Jul 23 20:34:54 iqx isdnlog: File /var/run/isdnlog.isdnctrl0.pid removed!
Jul 23 20:34:54 iqx isdnlog: File /var/lock/LCK..isdnctrl0 removed!
Jul 23 20:34:54 iqx kernel: fcpci: Removing registered applications!
Jul 23 20:34:54 iqx kernel: kcapi: card 1 down.
Jul 23 20:34:54 iqx kernel: capidrv: controller 1 down
Jul 23 20:34:54 iqx kernel: capidrv-1: now down.
Jul 23 20:34:54 iqx kernel: fcpci: Removing...
Jul 23 20:34:54 iqx kernel: kcapi: Controller 1: fcpci-d000-10 unregistered
Jul 23 20:34:54 iqx kernel: fcpci: Removed.
Jul 23 20:34:54 iqx kernel: fcpci: Driver 'fcpci' detached
Jul 23 20:34:54 iqx kernel: capidrv: Rev 1.1.2.2 : unloaded
Jul 23 20:34:54 iqx kernel: ISDN-subsystem unloaded
Jul 23 20:34:55 iqx kernel: fcpci: unsupported module, tainting kernel.
Jul 23 20:34:55 iqx kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.6.0
Jul 23 20:34:55 iqx kernel: fcpci: (fcpci built on Jun 2 2005 at 20:51:51)
Jul 23 20:34:55 iqx kernel: ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI
10 (level, low) -> IRQ 10
Jul 23 20:34:55 iqx kernel: fcpci: AVM FRITZ!Card PCI found: port
0xd000, irq 10
Jul 23 20:34:55 iqx kernel: fcpci: Loading...
Jul 23 20:34:55 iqx kernel: fcpci: Driver 'fcpci' attached to stack. (152)
Jul 23 20:34:55 iqx kernel: fcpci: Stack version 3.11-02
Jul 23 20:34:55 iqx kernel: kcapi: Controller 1: fcpci-d000-10 attached
Jul 23 20:34:55 iqx kernel: kcapi: card 1 "fcpci-d000-10" ready.
Jul 23 20:34:55 iqx kernel: fcpci: Loaded.
Jul 23 20:34:55 iqx kernel: ISDN subsystem Rev:
1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Jul 23 20:34:55 iqx kernel: capidrv-1: now up (2 B channels)
Jul 23 20:34:55 iqx kernel: capidrv-1: D2 trace enabled
Jul 23 20:34:55 iqx kernel: capidrv: Rev 1.1.2.2: loaded
Jul 23 20:34:55 iqx isdnlog: isdnlog Version 4.70 starting
Jul 23 20:34:55 iqx isdnlog: Holiday Version 1.10-Germany [12-Apr-1999]
loaded [11 entries from /usr/lib/isdn/holiday-de.dat]
Jul 23 20:34:55 iqx isdnlog: Dest V1.01: File '/usr/lib/isdn/dest.cdb'
opened fine - Dest 1.0 int (+h) AT DE NL CH BE CN
Jul 23 20:34:55 iqx isdnlog: Zone V1.25: Provider 0 File
'/usr/lib/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147
O1 L5
Jul 23 20:34:55 iqx isdnlog: Rates Version 3.12 [27-Feb-2005 22:15:34]
loaded [87 Providers, 0 skipped, 1325 Zones, 4755 Areas, 86 Services,
726 Comments, 10 eXceptions, 65 Redirects, 4298 Rates from
/usr/lib/isdn/rate-de.dat]
Jul 23 20:34:55 iqx isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16
detected, ioctl(IIOCNETGPN) is available)
Jul 23 20:34:55 iqx isdnlog: isdn.conf:2 active channels, 4 MSN/SI entries
Jul 23 20:34:55 iqx isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06
/dev/isdninfo=0x01)
Jul 23 20:34:55 iqx isdnlog: Everything is fine, isdnlog-4.70 is running
in full featured mode.
--------------------------------------------------------------------------------
Jetzt noch "rccapisuite restart":
Sat Jul 23 20:35:58 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffffc40: requested finish
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: CapiSuite 0.4.5 started.
Sat Jul 23 20:35:52 2005 Capi 0x817c680: Capi object created
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x0 Controller 0x1 InfoMask 0x10 CIPMask 0x0 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Capi 0x817c680: Registered successful at CAPI
with ApplId 2
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: 1 controllers found
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: Capi driver: AVM Berlin,
version 2.0/1.16
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: Controller 1: AVM GmbH (2
B channels, DTMF, SuppServ, transparent, FaxG3, FaxG3ext), driver
version 2.0/49.18
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x1 Controller 0x1 InfoMask 0x10 CIPMask 0x10012 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: >LISTEN_REQ ApplID 0x2 msgNum
0x2 Controller 0x1 InfoMask 0x10 CIPMask 0x30012 0x0 NULL NULL
Sat Jul 23 20:35:52 2005 Capi 0x817c680: info: 0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Capi 0x817c680: *
Sat Jul 23 20:35:52 2005 Capi 0x817c680: <LISTEN_CONF Controller 0x1
Info 0x0
Sat Jul 23 20:35:52 2005 Capi 0x817c680: **
Sat Jul 23 20:35:52 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: PythonScript created.
Sat Jul 23 20:35:52 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: IdleScript created.
Sat Jul 23 20:35:55 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:35:55 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Sat Jul 23 20:35:58 2005 -
/var/log/capisuite.error:----------------------------
Sat Jul 23 20:35:52 2005 CapiSuite 0xbffff040: CapiSuite 0.4.5 started.
--------------------------------------------------------------------------------
So jetzt rufe ich mich intern mal an:
Sat Jul 23 20:37:33 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:37:27 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:37:27 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Sat Jul 23 20:37:58 2005 -
/var/log/messages:-----------------------------------
Jul 23 20:37:53 iqx isdnlog: (AVM B1 driver detected (D2))
Jul 23 20:37:53 iqx isdnlog: Jul 23 20:37:53 * Call to tei 127 from TN
**14 on Gregor (privat) RING (Speech)
Jul 23 20:37:53 iqx isdnlog: Jul 23 20:37:53 * Call to tei 127 from TN
**14 on Gregor (privat) HLC: CCITT, Telefonie
Jul 23 20:37:56 iqx isdnlog: Jul 23 20:37:56 * Call to tei 127 from TN
**14 on Gregor (privat) RING (Speech)
Jul 23 20:37:56 iqx isdnlog: Jul 23 20:37:56 * Call to tei 127 from TN
**14 on Gregor (privat) HLC: CCITT, Telefonie
--------------------------------------------------------------------------------
Sat Jul 23 20:38:03 2005 -
/var/log/capisuite.log:------------------------------
Sat Jul 23 20:37:58 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: executing idlescript...
Sat Jul 23 20:37:58 2005 Pythonscript
/usr/lib/capisuite/idle.py,idle,0x81aa270: idlescript finished...
--------------------------------------------------------------------------------
Der capisuite-Daemon läuft und ruft offensichtlich regelmässig sein
Idle-Skript auf.
Leider finde ich nirgendwo eine Fehlermeldung. Ich habe daher leider
keinen Anhaltspunkt, warum der AB aufeinmal nicht mehr funktioniert.
Gibt es eine Möglichkeit mehr Debugmeldungen zu aktivieren?